It needed some resistance after all. I was trying to set it right at and nothing. Stopped halfway and picked up some resistors from OReillys and just put one on the passenger side since it was easy to get to. Cruise started working after.. awesome! Well until I hit the blinker on that side. Since the outers are tied to both the blinkers and stop it shuts the cruise off LOL! If it isn't one thing it's another, I probably should drink more. I was thinking about putting a diode in but I think those are ground switching circuits. Just going to split the wires and lights. The brake lights will be the outer lights and the blinkers will be the inners. Should work just fine.if you have access to a more modern scanner, you might be able to see all the switch inputs.. usually with cruise it just needs cruise on, brake off and being above minimum speed for the vehicle. ( usually around 30 mph)
Oh yeah and have to tear up all the passenger side of the cab. The noise is terrible now. Taking up the new seat mount and putting Kilmat under it and most on that side. Like I said I need to drink more.
And the new lifts showed up for the beds in the back so work on those tonight.