tnt_motorsports's latest activity
-
Ttnt_motorsports reacted to Wayne's post in the thread Never seize or grease in the tow receiver for pull behind rigs? with
Like.
Something like this would be perfect: https://a.co/d/7SeSE9P -
Ttnt_motorsports reacted to OLEJOE's post in the thread Never seize or grease in the tow receiver for pull behind rigs? with Like.
I’ve been thinking about carrying some coveralls to wear hooking, unhooking and setting up. Seriously
-
Ttnt_motorsports replied to the thread Never seize or grease in the tow receiver for pull behind rigs?.Only thing worse than baby 💩 is anti-seize! It gets everywhere. Just my $0.02
-
Ttnt_motorsports reacted to ctechbob's post in the thread Never seize or grease in the tow receiver for pull behind rigs? with Haha.
https://www.amazon.com/gp/product/B07THD8GJR/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 I use that on my ball and in the spring...
-
Ttnt_motorsports reacted to Wayne's post in the thread Never seize or grease in the tow receiver for pull behind rigs? with Like.
Yes, I use the same on my slide arms. No oil or grease to attract dirt and the dry graphite is very slippery...
-
Ttnt_motorsports reacted to OLEJOE's post in the thread Never seize or grease in the tow receiver for pull behind rigs? with Like.
I don’t put anything in mine but I don’t leave it in the receiver. I do put a little synthetic grease in the hitch for the ball and...
-
Ttnt_motorsports replied to the thread Never seize or grease in the tow receiver for pull behind rigs?.I use this product from Menards on the ball and the contact surface for the WD bars on my setup. It works good and provides a little bit...
-
Ttnt_motorsports reacted to Wayne's post in the thread Never seize or grease in the tow receiver for pull behind rigs? with Like.
I have seen ball mounts get stuck in the receiver because they never get removed. If I had a ball mount that was practically never...
-
Ttnt_motorsports reacted to Wayne's post in the thread Any significant concerns using a sleeve in a 3" receiver for a 2.5" tow hitch? with Like.
No, I don't see any problems with the sleeve. I do recommend a serious anti-rattle clamp to keep the pin hole from wearing and to keep...
-
Ttnt_motorsports replied to the thread Never seize or grease in the tow receiver for pull behind rigs?.I use nothing. I don’t want the mess. I clean mine occasionally to get the rust off. Just my $0.02
-
Ttnt_motorsports replied to the thread Any significant concerns using a sleeve in a 3" receiver for a 2.5" tow hitch?.What are you towing? If the 2.5” has the capacity then it should be fine. Just my $0.02
-
Tyeah, interesting, the swing in the weather anywhere there are mountains and elevation. a.coat in the morning and shorts and tank top in...
-
TI took these pictures a few days ago. Spring is a tricky thing here. 75F and sunny one day, 25F and snowing the next.
-
Ttnt_motorsports replied to the thread how would you like to be driving this truck?.that was a sudden stop! Just my $0.02
-
Ttnt_motorsports reacted to MSCH's post in the thread how would you like to be driving this truck? with Wow.
https://news.yahoo.com/video-shows-moment-truck-hauling-193013058.html